Zilver Sensor Tap
No Touch Automatic Sensor Taps/ Mixers incorporate state-of-the-art design and technology to provide the ultimate in convenience. In addition, they offer the added benefit of improved hygiene by eliminating the need to physically touch the fixture to turn the water on or off. This eliminates the chance of re-contaminating one’s hands by touching the same handle that was previously touched by not only your own unwashed hands, but also those of every user who came before you. Sensor taps/ Mixer are very simple to operate. The sensor detects hand movements and turns the tap on for use, then turns it off after no movement is detected for a specific amount of time. Whether you are unsure as to which style of automatic tap will best complement your existing design or are in the process of designing your facility from the ground up, our expert customer service personnel are available to help you.
Battery & electric operated- for single hole installation inclusive of
- Brass Body
- Flexible connection hose with brass nuts
- Faucet aerator
- Chrome plating 0.2-0.3 micrometer
- Nickel Plating 8-10 micrometer
- Minimum pressure 0.5 to 1 bar
- Clean water required due to dust particle sensitivity, install filter if required
1 review for Zilver Sensor Tap
Related products
SKU: ZY9030
Zilver Sensor Tap
- Product Standard EN 15091
- Aerator Type M24X1 Male Threaded
- Flow Rate 7.5 - 9 Lt / Min (3 Bar)
- Operation Type Electronic and Sensor with Automatic Photocell Eyed
- Spout Length 95 mm
- Spout Height 135 mm
- Water Connection Flex Dimension 1/2"
- Max. Performance Temperature 80°C
- Suggested Performance Temperature 60°C
- Photocell Faucet Energy Feed System Electric (220V / 12V) and Battery (6V DC Lithium Cell)
- Product Total Height 160 mm
SKU: ZY1067
Zilver Concealed Sensor Urinal Flush Value
- Single chip microcomputer design, automatic induction, two-stage washing, water saving.
- Four No. 5 alkaline batteries are used 100 times a day without replacement within two years. (AC and DC power supply available)
- Fine drawing, all stainless steel design, with handle.
- Stainless steel box, all copper solenoid valve: electronic part seal design, waterproof and moisture-proof.
- It can be adjusted automatically within 30-70cm as required.
- Ceramic valve core is adopted, and the water output can be adjusted arbitrarily according to the water pressure.
- It can be removed and washed at any time to avoid blocking.
- Anti gambling plug pin is installed in the solenoid valve to avoid failure of the solenoid valve.
- Equipped with manual button to prevent the sensor from being damaged and unable to be used.
- Installation of concealed wall type, straight up and down, suitable for wall installation above 10cm thick.
- Wash automatically every 24 hours to avoid peculiar smell caused by water drying in the water trap.
Sarang Ahmed –
I want to 6 sensor tap for masjid please give me quotation.
JazakAllau